Cavity Slider Waterstop Building Codes & Rules

- Membrane Tools™ simplifies the National Construction Code (NCC) with interactive graphics, including deemed to comply & best practices.

Waterstop Angle

Split Jamb

Cavity Sliding Door

Finished Floor Level

Split Jamb

Substrate

Wall Lining

Adhere to cavity doorset

Sealant fillet

Waterstop

Angle

Sealant / Adhesive

Sealant bead

Top of Membrane

Finished Floor Level

NCC 2022 HP, 10.2.2 (1) (c)

AS 3740:2021, 4.11.2 (b)

≥ 40^{NCC 2022 HP, 10.2.2 (1) (c)AS 3740:2021, 4.11.2 (b)}

Show finishes

AS 3740:2021, 4.9.1 (c) (ii)

≥ 25^{AS 3740:2021, 4.9.1 (c) (ii)}

Structural Floor Level

AS 3740:2021, 4.9.1 (d)

≥ 150^{AS 3740:2021, 4.9.1 (d)}

Membrane

Turn the Membrane down into the Leak Control Flange^[1]
Compatible to suit Substrate & bedding / finishes^[2]
Test & protect from damage^[3]

Membrane AUDIT

NCC 2022 V2

All Building Classes

NCC 2022 F2D2, S26C3, 10.2.26 [2019 F1.7]

May 2023

AS 3740:2021, 4.5.4 (a)

AS 3740:2021, 4.5.4 (b)

AS 3740:2021, 4.5.4 (c)

AS 3740:2021, 4.5.2

Building elements in Wet Areas to be Waterproof or Water Resistant to NCC Specification 26, Part 10.2, & AS 3740
Curing & protection^{AS 3740:2021, 4.5.4 (a)}
Fully cured to manufacturers' recommendations
Protect from physical & chemical damage until covered by finishes
Flood testing^{AS 3740:2021, 4.5.4 (b)}
If any leaks occur, these shall be repaired following the system design & retested
Electronic leak detection^{AS 3740:2021, 4.5.4 (c)}
If any discontinuities occur, these shall be repaired & retested only on the repaired areas
Seam probe testing^{AS 3740:2021, 4.5.2}
If any seam failures occur, these shall be repaired & retested

Membrane Curing & Inspection RULES

NCC 2022 V2

All Building Classes

NCC 2022 F2D2, S26C3, 10.2.28 [2019 F1.7]

May 2023

AS 3740:2021, 4.5.2

AS 3740:2021, 4.5.3

Building elements in Wet Areas to be Waterproof or Water Resistant to NCC Specification 26, Part 10.2, & AS 3740
Fully cure prior to any testing^{AS 3740:2021, 4.5.2}
Visual inspection conducted prior to application of overlay finishes^{AS 3740:2021, 4.5.3}

AS 3740:2021, 4.3.1 (a)

AS 3740:2021, 3.2

AS 3740:2021, 4.17 (b)

Turn the Membrane down into the Leak Control Flange^{AS 3740:2021, 4.3.1 (a)}
Compatible to suit Substrate & bedding / finishes^{AS 3740:2021, 3.2}
Test & protect from damage^{AS 3740:2021, 4.17 (b)}